What materials can you cut and fabricate?

We cut rubber, silicone, neoprene, EPDM, cork, fiber, acrylic, glass, foam, and other sheet materials into custom shapes. Use the configurator to select your material, shape, and dimensions for an instant price.

How do I get an instant price for a custom cut part?

Use the configurator on this page. Select your shape, material, and thickness, enter your dimensions, and the price updates live. No quote request, no back-and-forth.

What shapes can you cut?

We cut over 30 shapes including discs, rings, rectangles, squares, capsules, ovals, hexagons, D-shapes, and custom polygons. Upload a DXF file for fully custom shapes.

Is there a minimum order quantity?

No minimum. We cut single pieces as readily as bulk orders. Price per piece decreases automatically with quantity.

How long does production take?

Most custom fabricated parts are cut and shipped in about 1 week.

What is the maximum size you can cut?

The maximum size depends on the material you choose. Most rubber, silicone, neoprene, EPDM, cork, fiber, and glass sheets go up to 32.5 x 32.5 inches, and acrylic sheets up to 23.5 x 23.5 inches. The configurator tells you if your part is too large for the selected material. Contact us for larger parts.

Do I need to send a file?

No file needed for standard shapes. The configurator generates the cut geometry from your dimensions. For fully custom shapes, you can upload a DXF file.

1 1

Custom Parallelogram Parts Cut to Size

View full details

Need slanted, parallelogram-shaped parts? Enter your dimensions, pick a material, and the quoter prices the part right away. No minimum order, so one-offs and prototypes are fine.

Enter the base length, the height, and the slant, meaning how far the top edge is shifted from the bottom edge. Parallelograms are used for angled shelf brackets, stair and ramp shims, signs and lettering backers, tiles and display pieces.

Materials: Acrylic in clear, frosted, white, black and colors (acrylic edges come out flame-polished), polycarbonate, glass and mirror, plus neoprene, EPDM, silicone, Buna-N, cork and fiber.

How it's made: every part is CNC cut (laser, waterjet, and more) to ±0.015″. We don't cut tempered glass. Order one part or a few hundred; every piece in a batch is cut from the same file, so they all match.

Related: rhombus, trapezoid and rectangular parts.

What you enter: Base Length, Height, Slant (top edge offset). Pick inches or mm in the quoter.

Size: Up to 32.5″ × 32.5″ for most materials. Glass, mirror, polycarbonate, Viton and PTFE top out at 18″ × 12″, and borosilicate at 12″ × 12″; the quoter shows the exact limit for each material.

Get a live quote

FAQ

What is the slant measurement?

It's how far the top edge is shifted sideways compared with the bottom edge, measured parallel to the base.

Can I cut a parallelogram in rubber?

Yes. Neoprene, EPDM, silicone and Buna-N are all available.

What tolerance do you hold?

±0.015″.

Is there a minimum?

No.

How fast does it ship?

Most orders ship in 1 week.

Need help before you order?

Which material should I pick?

Full list on our Material Guide.

Pads, spacers, general rubber parts → Neoprene
Flexible rubber, wide temperature range → Silicone
Weather, water and ozone → EPDM
Oil and fuel contact → Buna-N
Low-pressure seals and spacers → Cork, or Fiber for simple cut shapes
Displays, covers, see-through parts → Clear acrylic (also frosted, black, white)
Guards and covers that need impact resistance → Polycarbonate
Glass panels and sight openings → Clear glass, frosted glass or mirror

No minimum order. Ships in 1 week. Not sure? Email fastestfabrication@gmail.com.

How to measure

Measure the finished cut size you need, not the rough stock.
Discs: diameter across the widest point. Rectangles: length × width. Rings: outside diameter (OD) and inside diameter (ID). Other shapes: follow the fields on that product.
A tape measure is fine for most parts. Calipers help on small pieces.
Pick material and thickness in the quoter.
Fully custom shape? Upload a DXF. No CAD? Send us a sketch with measurements.

More detail: Measuring Guide. Questions: FAQ.